FANUC
This page is a guide to help users understand the requirements of setting up a FANUC robotic welding system for use with Verbotics Weld. Verbotics also offer consulting and training services to assist with the calibration and setup of a welding system - please contact us for pricing.
TCP Calibration
The real world TCP should be calibrated using the FANUC tool calibration. After calibration, it is then suggested that the rotational values are overwritten with theoretical values (that can be supplied by Verbotics) as rotational values are difficult to calibrate using this method.
Care should be taken to ensure that the axes directions follow the expected directions for Verbotics Weld:
Z - Pointing in the wire direction.
X - Pointing up from the robot when the robot is at position
[0, 0, 0, 0, 0, 0].Y - Orthogonal to X and Z with a right hand rule.
The TCP calibration should use the expected stickout specified in the workcell model file supplied by Verbotics for the cell and the wirecut routine should be written to cut the wire to this length prior to touch sensing.
Code Output
Verbotics Weld creates FANUC .ls files that can be loaded and executed by your robot. Your robot controller will need an option to compile these into .tp files, or you can do this using FANUC ROBOGUIDE.
Robot Backup
We we typically request a robot backup as part of the setup process. To provide, this:
Insert a USB disk.
Go to
MENU>7 FILE>1 FILE.Select
[UTIL]>Set Deviceand select the correct USB device (typicall USB on TP for the USB port on the teach pendant).Select
[UTIL]>Make DIRand enter a directory name to save files into (e.g. “BACKUP”).Select
[BACKUP]>8 All of aboveand confirm to perform the backup.On your computer, confirm the folder was created on your USB stick and contains several files including
BACKDATE.DT.Compress the folder from your USB stick into a Zip archive and share it with us.